SKU: NIT-OIL-COL

NISSAN RB NITTO CRANK COLLAR (REQUIRED FOR EARLY R32 GTR, ALL GTS-T AND RB30)

$AUD150.00
In Stock


Calculate Shipping

NISSAN RB NITTO CRANK COLLAR (REQUIRED FOR EARLY R32 GTR, ALL GTS-T AND RB30) Description

Nissan RB CRANK COLLAR (REQUIRED FOR R32 GTR, ALL GTS-T AND RB30)

NITTO’s RB series crankshaft collar was specifically developed to be used on RB series crankshafts that have the factory narrow oil pump drive on the crankshaft snout.

Most earlier RB series engines have the crankshafts with the narrow oil pump drive. This becomes a major problem when upgrading your oil pump to the commonly used wider gear type pumps as the contact area from the drive to the oil pump gear was minimal. This caused either the drive to wear out prematurely or excessive force to be applied onto a small area of the oil pump gear and cause eventual oil pump failure followed by major engine failure.

NITTO offers an affordable solution to this problem by designing a high tensile 709 series steel RB series crank collar with a full width contact area compatible with any replacement oil pump. This ensures the correct contact area needed to safely run you engine at high rpm and minimizing the possibility of premature oil pump failure due to a poor contact area.

Full Width Contact Area Ensures Increase Reliability
Durable 709 Series High Tensile Material
Works on All OEM Type RB Series Crankshafts
Compatible with All Replacement Oil Pumps

Specifications

SKU NIT-OIL-COL
Brand nitto
Shipping Weight 0.1500kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.100m
Shipping Cubic 0.000250000m3

Reviews

Be The First To Review This Product!

Help other GameOn Motorsports users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


$AUD1,449.00

Not yet rated
SKU: NIT-OIL-RB26

NISSAN RB20 / RB25 / RB26 / RB30 NITTO Oil Pump

$AUD399.00

Not yet rated
SKU: HT-070202

Haltech USB Stingray 2 Channel Scope


More From This Category


$AUD5,845.00

Not yet rated
SKU: NIT-STK-SR20I87

SR20 2.2L NITTO STROKER KIT (I-BEAM RODS / 87.0MM BORE)

$AUD9,650.00

Not yet rated
SKU: NIT-STK-RB26I2887

RB26 2.8L NITTO STROKER KIT (I-BEAM RODS / 87.0MM BORE)

$AUD1,330.00

Not yet rated
SKU: NIT-JE-SR202240

NISSAN SR20 2.2L STROKER NITTO PISTONS - 87.0MM (+.040") -15cc DISH

$AUD395.00

Not yet rated
SKU: NIT-MHG-SR2012

NISSAN SR20 NITTO 1.2MM / 88MM BORE HEADGASKET

$AUD6,080.00

Not yet rated
SKU: NIT-CNK-RB3086

NISSAN RB30 3.0L NITTO 86.0MM STROKER CRANK

$AUD395.00

Not yet rated
SKU: NIT-MHG-SR2018

NISSAN SR20 NITTO 1.8MM / 88MM BORE HEADGASKET

$AUD1,965.00

Not yet rated
SKU: NIT-JE-RB2620

NISSAN RB26 - 86.5MM NITTO PISTONS (+.020") +18cc DOME

$AUD9,650.00

Not yet rated
SKU: NIT-STK-RB26I27865

RB26 2.7L NITTO STROKER KIT (I-BEAM RODS / 86.5MM BORE)